Features
1. Design Speed: 100 m/min, Working Speed: 70-80 m/min.
2. Working Width: 1400-1600-1800-2000 mm.
3. Slotted Roller Diameter: ¢280mm. Press Roller Diameter: 285 mm.
Front Heater Diameter: 300 mm. Adhesive Roller Diameter: 215 mm. Doctor’s Roller Diameter: 105 mm
4. It has an oil type transmission unit to ensure noiseless and high speed operation.
5. Corrugated, press and starch rollers are adjusted by pneumatic system.
6. The machine design is a ductless conveyor system (fingerless) vacuum suction system.
The moon produces traceless corrugation.
7. Slotted and Press roller bearings are lubricated with high temperature resistant grease.
8. Starch parts ensure automatic conversion of starch.
9. Corrugated rollers are made of high quality hard steel and hardened by induction.
(52CrMo)(HRC58-60).
10. The top of the starch device is specially designed for low consumption.
11. The paper width adjustment system of the starch group is manual. Motorized option
is optional.
| 1 | Working with | 1600mm | ||||
| 2 | Operation direction | left or right | ||||
| 3 | Design speed | 100m/min | ||||
| 4 | Temperature scope | 160-220 C | ||||
| 5 | Pneumatic working pressure | 0.4-0.9Mpa | ||||
| 6 | Pressure | 0.8-1.3Mpa | ||||
| 7 | Flue profile | UV type or UVV type | ||||
| 1 | Diameter of corrugated roll | |||||
| 2 | Diameter of pressure roller | |||||
| 3 | Diameter of applicator glue roll | |||||
| 4 | Diameter of preheater roll | |||||
| 1 | Main driving motor | power | 11kw | |||
| Normal voltage | 380V 50 HZ | |||||
| Continues (S1) working system | ||||||
| 2 | Wind suction motor | Normal voltage | 380V 50 HZ | |||
| Continues (S1) working system | ||||||
| 3 | Glue adjustment reduction box | power | 80kw | |||
| Normal voltage | 380V 50HZ | |||||
| Short time (S2) working system | ||||||
| 4 | Glue adjusting gap motor | power | 0.55kw | |||
| Normal voltage | 380V 50HZ | |||||
| Short time (S2) working system | ||||||
| 5 | Glue pump motor | power | 0.55kw | |||
| Normal voltage | 380V 50HZ | |||||
| Continues (S1) working system | ||||||
| No. | Main parts name | Origin | Raw material | |||
| 1 | Wall plate and based wail plate | Local | HT200 | |||
| 2 | Rotary joint and metal soft pipe | LUGUANQIU, Shanangdong | ||||
| 3 | Main driving motor | Hengshui | ||||
| 4 | Bearing | HRB, ZWZ, LYC | ||||
| 5 | The shaft with seat | HEBEI | ||||
| 6 | High pressure fan | HEBEI | ||||
| 7 | Cylinder | SHANDONG | ||||
| 8 | Magnetic valve | ZHEJIANG | ||||
| 9 | Drain valve | zhejiang | ||||